Cockpit cleaners ZOLLEX are effective products of care for plastic details of passenger compartment. They may be used for cleaning and renewal of passenger compartment details (dashboard, control panel, unpainted bumpers, rubber and plastic moldings and other details of plastic and vinyl). They effectively clean the dirt off the surfaces. They easily penetrate smallest score marks of the details surface and displace the dirt from it.

They renew plastic appearance, give soft brilliance, intensify antistatic properties that prevent dust deposition and do not leave oily film after using and protect.

Available in different packings of 200ml and 750ml and in different odors:
Green Apple, Rose, Vanilla, New Car, Lemon, Cologne, Strawberry and Cherry.

Perfectly cleans and degreases vehicle interiors. Usable for plastic surfaces, fabric and artificial leather. Appropriate for cleaning seats, rims and bumpers. For professional use. Quickly removes stains such as: lipstick, coffee, juices, oils, resin, grease, varnish, remains of soap, tobacco stains and many other stubborn stains.
Use: Shake before using. Apply the cleaner on a stain and let it work for a few minutes. Wipe away any remaining foam with a sponge. In case of very stubborn stains, repeat the procedure several times. Test the cleaner on a small part before using it on the entire surface. 

Available in 650ml and 200ml packing.

Cleans, maintains and protects the tires in one operation. Gives black «wet» shine. Prevents aging and cracking. Needs no wiping. Safe for all other parts of vehicle, such as plastic, metal, chrome, aluminum.

DIRECTIONS FOR USE: Shake before using. Hold the can 10-15 cm away from the tire and spray the product on the surface with circular movements. Leave the foam to dissolve and be absorbed. The foam dries within a few minutes, so wiping is not necessary.

Available in 650ml package.

ZOLLEX Body art napkin is used for car polishing, cleaning the interior of vehicle and can also be used in household or for cleaning windows. After usage when the napkin gets dirty, just clean it with cleaning agent.

Dimensions: 50x45cm

ZOLLEX Synthetic chamois easily removes all kinds of dirt and stains. For professional usage and usage in every day cleaning.

Instructions for usage: Before first use it should be well cleaned. After usage, clean it with soap or cleaning agent. It should be always a bit moist. If it hardens, just put it in water.

Available in two sizes:

Small 32 x 42,5cm 
Big 43 x 61,5cm 

Ideal for cleaning and polishing. Can be used dry (for cleaning of dust and polishing) or wet (for cleaning of dirt) on exterior and interior of car and in household.

Available in blue, green, grey.

Suitable for polishing, cleaning and maintaining all painted surfaces of cars, boats, motorbikes, bicycles, as well as in households. Adds luster and renews the color of varnish.

APPLICATION: Wash the car with Zollex shampoo and dry it. Use a soft cloth to apply a thin layer of paste on the surface with circular movements. Wait for the paste to dry. Polish with clean and dry fabric. Do not polish heated surfaces, and do not use in direct sunlight.

Available in 100g packing.

DECO BLIK Universal fast drying paint in spray. Can be used on inside and outside surfaces. Completely covers wooden, metal, glass and plastic surfaces. DECOBLIK spray paint is available in RAL colors.

ZOLLEX CV-Boots are made from 100% japanese neoprene. These boots combine flexibility, cut and puncture resistance. They are resistant to oil, gasoline and other oil products (lubricants and fuel) and don’t lose their properties under the temperature mode of operation. Includes graffiti grease.

Available in three sizes: small, medium and large.

The filter catridges in the fuel filters ZOLLEX purify the fuel supplied to the injection system as much as possible. The fuel filters are mainly composed of a mixture of cellulose and polyester fibre treated with duroplasts impregnation which increases fuel resistance. The filtering materials have multilayer structure composed of composite materials which increase its ability to absorb the harmful particles for more than 100% in comparison with other filtering elements. The novelty of the trade mark ZOLLEX is a coarse mesh filter with magnet. The know-how of this element is the following: the metal particles in the fuel are hold by the magnet.

Available with different diameters.

ZOLLEX Exhaust system sealant is a joint and crack sealer for exhaust system, ceramics, furnace, fireplace. For temperature up to 1100°C. Creates a refractory seam, tightly sealing joints and cracks. Applies soft - sets weld-hard. Includes reinforced screen (142 g version). It has no odor.

Available in 75g and 142g packing.

ZOLLEX Rear view mirror adhesive is excellent for bonding glass and metal.

Easy to use: Mark the original location of mirror mounting on the windshield. Clean any dirt from the bonding surface, degrease it and dry. In case of product RM-281 (1,2g) remove the cardboard seal from the PRIMER tube and put it on the opposite end. Squeeze the cardboard seal to burst the glass bulb inside the plastic tube. Allow the liquid to run to the tip. In case of product RM-283 (0,9g) wipe the area with AKTIVATOR napkin. Apply PRIMER to the inside of the windshield in the marked area . Allow to dry for 1-2 minutes. Apply one drop of glue to the mirror mount. DO NOT SMEAR . Push the mirror mounting onto the glass on the marked place and hold without moving for 1-2 minutes to allow the adhesive to cure. Wait for 10 minutes and mount the mirror. 

Na voljo v 1,2g in 0,9g pakiranju.

ZOLLEX Speedy bond is an ultra strong adhesive and filing powder. It can be used just as an adhesive or with the reinforcing powder, that will help you repair almost anything.Rock hard in 7 seconds!

Black powder is used to repair: Hard plastic.

ZOLLEX Speedy bond adhesive is an ultra strong adhesive and filing powder. It can be used just as an adhesive or with the reinforcing powders, that will help you to repair almost anything. Rock hard in 7 seconds!

Grey powder to repair: Aluminum and Metal surfaces, it is also oil and petrol resistant. 

ZOLLEX steel epoxy is a high steel filled polymer product. Once fully cured it becomes solid like steel. It sustains high temperature which makes it fireproof. Can be used for repairing ceramic, wood, metal, concrete and glass. Due to the fact that it's steel filled, IT IS NOT SUITABLE FOR INSULATION.

Availabel in a 35g injection.

ZOLLEX EPOXY adhesive is a high polymer product which solidifies very hard once fully cured. It can sustain high temperatures which makes it fireproof. Does not shrink or deform. Can be used to bond, repair, patch most articles except nylon, silicone, fluorine resin, soft PVC, rubber, polyethylene and polypropylene. Best used for repairing electrical appliance, ceramic tile, wooden, metallic, concrete and glass products.

Available in a 35g injection.

ZOLLEX Is a high polymer product, which solidifies very hard like steel once fully cured. It will sustain high temperature 110°C. It also provides good resistance against chemical solvent, antiseptic and ultra violet (UV) rays. Does not shrink or deform. Due to its toughness, it can withstand very high tensile pulling strength after it has fully cured. Can be used to bond, repair, patch most articles except nylon, silicone, fluorine resin, soft PVC, rubber, polyethylene and polypropylene. Best used for repairing ceramic tile, wooden, metallic, concrete and glass articles. SUITABLE FOR ELECTRICAL INSULATION.

Available in 28g + 28g packing.

ZOLLEX semi-clear acrylic glue is a high polymer product, which solidifies very hard like steel once fully cured. It will sustain high temperature which makes it fireproof. It also provides good resistance against chemical solvent, antiseptic and ultra violet (UV) rays. Does not shrink or deform. Due to its toughness, it can withstand very high tensile pulling strength after it has fully cured. Can be used to bond, repair, patch most articles except nylon, silicone, fluorine resin, soft PVC, rubber, polyethylene and polypropylene. Best used for repairing ceramic tile, wooden, metallic, concrete and glass articles. SUITABLE FOR ELECTRICAL INSULATION.

Available in 10g + 10g packing.

ZOLLEX steel-filled acrylic glue is a high polymer product, steel filled, which solidifies very hard like steel once fully cured. It will sustain high temperature 110°C. It also provides good resistance against chemical solvent, antiseptic and ultra violet (UV) rays. Does not shrink or deform. Due to its toughness, it can withstand very high tensile pulling strength after it has fully cured. Can be used to bond, repair, patch most articles except nylon, silicone, fluorine resin, soft PVC, rubber, polyethylene and polypropylene. Best used for repairing ceramic tile, wooden, metallic, concrete and glass articles. Due to the steel filled, IT IS NOT SUITABLE FOR INSULATION. 

Available in 28g + 28g packing.

Universal contact adhesive. Ideal for bonding wood, metal, rigid PVC, leather, rubber, felt, plastic, glass, ceramics, porcelain, paper. Not suitable for bonding products which are in contact with food. It sustains temperature up to 120°C.

How to use: The surfaces must be dry clean and free of grease. Apply adhesive evenly on both surfaces, wait for about 15 minutes and strongly press for a few seconds. Crucial is how strong we press, not the duration of the pressure. Glued product can be used after 24 hours. 

Available in 30g packing.

ZOLLEX SUPER is a quick-drying glue for plastic, wood, rubber, leather and ceramics.

Directions for use: Surfaces to be glued should be clean and dry and free from dirt or grease. Apply a drop of glue on one surface and press both parts together for around 15 seconds until the bond sets. Important - avoid skin contact.

Available in 12 x 3g packing.

ZOLLEX Thread locker blue is for locking nut, bolts, bearing, gears and pipe joint that reassembling required for service and repair. Shock and vibration resistant on vehicle, tools, machines and parts. It is  also resistant against chemicals, oil, etc. Dries in 20-30 minutes. Full cure occurs in 24 hours.

Available in 10g packing.

ZOLLEX Thread locker red is a high strength material for locking studs or bolts for disassembly where high torque is required. Its high permeation ability into tiny spaces means that it is excellent for use as an anti-rust agent on metals. It is shock and vibration resistant on vehicles, tools, machines and moving parts. It is also resistant against chemicals, oil, etc. 

DIRECTIONS FOR USE: Remove the cap.  Wipe off any moisture, oil and dirt on the area to be treated with THREADLOCKER BFS-6. Directly apply to the required area (thread, screw, bolts, bearing gears). Clean the nozzle and replace the cap after use.  

Available in 10g packing.

ZOLLEX Welding epoxy is suitable for use on metal, wood, porcelain, fiberglass surfaces, pipes, electrical connections, seals, ceramics, massage tubs, the majority of plastics, etc.. Weight is not suitable for use with nylon, silicone, fluorine resins, soft PVC, polypropylene, polyethylene or rubber.

Available in 57g and 28g packing and in black version, which is meant for steel surfaces and in white version for all kinds of surfaces.

ZOLLEX Motor doctor improves compression and oil pressure and reduces oil consumption in old and worn-out engines. Prevents oil penetrating into the combustion chamber, carbon forming and smoking engine. Slows down ageing of new engines, thus extending their service life. Motor Doctor forms a lubricating film on the surfaces of moving parts, provides reliable engine operation in harsh conditions and ensures easy starting all year round. It can be mixed with all synthetic and mineral oils and can be added to the new engine oil with each change. One can is enough for oil systems of up to 6 litres.

Available in 325ml packing.

ZOLLEX Engine flush removes sludge and varnish from insoluble parts in the engine oil system. Can be used at each change of engine oil.

Application: Flush the oil system before changing oil. One can of additive is enough for 5 litres of motor oil. Add the flushing fluid into the old engine oil, run the engine and let it idle for 10-15 minutes. Drain off the old oil, change the oil filter and fill the engine with new oil.

Available in 325ml packing.

ZOLLEX Engine stop leak stops an additive able to restore the gasket elasticity. It is suitable for diesel and petrol engines. The product has no harmful effect on the oxygen sensors and catalysts.

Application: Add to engine oil (sufficient for 3 - 6 litres). If the leak persists after a week, you need your engine repairing.

Available in 325ml packing.

ZOLLEX Radiator flush provides an excellent cooling system flush within 10 minutes, removing rust and scale.  It does not damage the rubber seals, metal parts and gaskets during use.

Application: All operations must be carried out on a cold engine. Remove the radiator cap, drain the coolant (equal volume to the additive volume). Start the engine and increase the temperature of fluid up to operating temperature. Shake the bottle and pour the additive into the radiator. Slightly tighten the radiator cap, leaving some room for the steam. Let the engine idle for 15 minutes then turn off  engine, cool  the radiator and drain the coolant. Flush the radiator with clean water and then fill the radiator with new coolant.

Available in 325ml packing.

ZOLLEX Radiator stop leak helps eliminate leaks quickly. Safe for use with cooling system parts, copper and aluminum radiators.

Application: Remove the radiator cap and start the engine at idle speed (for about 10 minutes). Shake well and pour the additive into the radiator while the engine is running. One bottle is enough for 20l of coolant. Fill the coolant up to max indicator. Tighten the radiator cap and keep the engine running until the leak stops.

Available in 325ml packing.

ZOLLEX Injector cleaner effectively cleans diesel injectors, reduces exhaust fumes, saves fuel, recovers engine power, provides fuel stability while saving, and lubricates parts of the diesel system.

Application: In order to maintain clean injectors, the treatment should be added every 2500-3000 km of driving. One bottle is enough for between 45 and 95 litres of fuel.

Available in 200ml packing.

ZOLLEX injector cleaner - petrol contains additives that have the ability to recover injection characteristics within the consumption of one fuel tank. This product has been specially designed to clean the fuel injectors.

Application: Add the contents of the bottle to the tank when refueling. One bottle is enough for 60l of fuel. If the fuel system is strongly contaminated, secondary processing may be required. For the best results, add the treatment to petrol with every oil change. 

Available in 200ml packing.

Valve lapping paste for petrol and diesel engines. Contains rough and clean compositions in one bottle. Processing time contracts to 2 min. Provides impermeability for valves. Provides a ground-surface roughness of Ra= 0,6 mkm.

Available in 40g packing.

ZOLLEX Lapping paste Diamond contains abrasive, approximate hardness to diamond, used for diesel and petrol engines, as well as parts with higf hardness. Contains rough and clean compositions in one bottle. Valve processing time contracts to 2min. Provides a ground-surface roughness of Ra=0,5 mkm. The average grain size is 32 microns.

Available in 40g packing.

The new synthetic structure of DX-88 enables easy rust removal, cleaning all types of stains, and application on all types of surfaces. It can be used even on the most complex mechanisms, as it creates an extremely thin non-stick layer, which does not attract dust.

Basic functions:
*protects surface from corrosion,
*helps the engine start more easily,
*keeps even an application of varnished surfaces,
*non-conductive,
*creates an impermeable layer,
*removes rust, moisture, surface stains, oil stains, remains of glue and sealants,
*helps remove tightly attached nuts,
*cleans even the most stubborn stains,
*enables heating of mechanisms,
*protects metallic elements,
*lubricates locks,
*prevents creaking.

Use: Apply the product on a surface, leaving it to absorb. 

Available in 110ml and 277ml packing.

***AVAILABLE ALSO IN SMART STRAW FORM FOR AN EASIER APPLICATION***

Rust remover contains active ingredients which have high penetrating and dissolving power. Provides an easy loosening for rusted threads. Lubricates the friction surfaces and eliminates parts squeaking and sticking . Protects metal parts from corrosion and rust. Cleanses the surface from old grease and oily dirt. Removes rust and prevents corrosion. Dissolves insoluble technical dirt. No adverse impact on lacquered surfaces. 

Application: Shake the bottle before use. Spray the product from a distance of 15-20 cm and wait for a few minutes. In the case of heavy corrosion of disconnected parts, firstly remove dirt and loose rust with a wire brush and then spray the product in several stages. 

Available in 450ml packing.

Start spray is used for quick and efficient ignition of petrol and diesel engines of all kinds of vehicles. Used in low outside temperatures. Tested to -60°C. Contains special ingredients which lubricate the engine at the time of ignition. 

DIRECTIONS FOR USE: Shake before use. Spray the content (2-3 sprays) directly to the air filter and carburetor. Start the engine immediately after dispersion. In the case of diesel engines, there is no need to wait for the warming of the spark plugs.

Available in 400ml packing

Quickly and effectively cleans the carburetor nozzles, pipes, valves and float chamber. Dissolves and removes carbon deposits, soluble varnish deposits which interfere with the carburetor and other working parts.

BENEFITS:

• Effective cleaning formula
• Safe for other parts
• Easy to use
• Helps to prevent comebacks

DIRECTIONS FOR USE: When the engine is cold, remove the air filter and treat the outer carburetor surface and connections with the cleaner. Spray short bursts several times into the chamber of the carburetor whilst turning the throttle valve by hand. Repeat if necessary. Use regularly for better results. Avoid contact with paint.

Available in 450ml packing.

ZOLLEX black gasket maker is suitable for gaskets used in high temperature applications up to 315°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. 

DIRECTIONS FOR USE: Remove old gaskets and clean all surfaces thoroughly. Remove cap, puncture inner seal, screw on nozzle and cut to required size. Apply a continuous, uniform, 1,5 - 3mm bead around the perimeter of one surface. Wait 10 minutes for silicone to skin over. Reassemble parts. NOTE: Leave space for the gasket when reassembling. Do not over-tighten bolts. Remove excess silicone with a dry cloth or alcohol wipe. Silicone dries to touch in 1 hour. Allow 24 hours to fully cure and bond. REPLACE CAP AFTER USE. 

Available in 85g and 310g packing.

ZOLLEX Clear gasket maker is suitable for gaskets used in high temperature applications up to 315°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids.

DIRECTIONS: Remove old gaskets and clean all surfaces thoroughly. Remove cap, puncture inner seal, screw on nozzle and cut to required size. Apply a continuous, uniform, 1,5 - 3 mm bead around the perimeter of one surface. Wait 10 minutes for silicone to skin over. Reassemble parts. NOTE: Leave space for the gasket when reassembling. Do not over-tighten bolts. Remove excess silicone with a  dry cloth or alcohol wipe. Silicone dries to touch in 1 hour. Allow 24 hours to fully cure and bond. REPLACE CAP AFTER USE. 

Available in 85g packing.

ZOLLEX Red gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids.

DIRECTIONS FOR USE: Remove old gaskets and clean all surfaces. Remove cap, puncture inner seal, screw on nozzle and cut to required size. Apply a continuous, uniform, 1.5 -3mm bead around the perimeter of one surface. 4. Wait 10 minutes for silicone to skin cover. Reassemble parts. The gasket is fully prepared in 24 hours.  NOTE: Leave space for the gasket when reassembling. Do not over-tighten bolts. Remove excess silicone with a dry cloth or alcohol wipe. Silicone dries to touch in 1 hour. Allow 24 hours to fully cure and bond. 

Available in 85g and 310g packing.

ZOLLEX Gray gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids. 

DIRECTIONS FOR USE: Remove old gaskets and clean all surfaces thoroughly. Remove cap, puncture inner seal, screw on nozzle and cut to required size. Apply a continuous, uniform, 1,5 - 3mm bead around the perimeter of one surface. Wait 10 minutes for silicone to skin over. Reassemble parts. NOTE: Leave space for the gasket when reassembling. Do not over-tighten bolts. Remove excess silicone with a dry cloth or alcohol wipe. Silicone dries to touch in 1 hour. Allow 24 hours to fully cure and bond. REPLACE CAP AFTER USE. 

Available in 85g packing.

ZOLLEX Brake fluid DOT-4 is intended for vehicles with hydraulic brake discs and brake drums, as well as for car clutches at temperatures between -50°C to +50°C. The boiling point of the brake fluid is above 230°C. 

Available in 0,5L and 1L packing.

ZOLLEX universal insulation tapes, resistant to temperature and waterproof. It is useful for different repairs, wrapping of different pipes and attaching. It is intended for professional and everyday use. 

Available in different colors: black, red, white, blue and green.
Dimensions: 19mm x 10m
                     

ZOLLEX bothsided adhesive tape is used for attaching without using tools. They save your time and energy and do not damage the surface. 

Available in black and white color and different dimensions.

Silicone spray lubricates rubbing surfaces and protects them. Based on silicone, it does not contain mineral oils and fats or chlorinated solvents. It protects and lubricates the surface, forming a clear, very strong film. It lubricates guides covers, seats, traction control carburettor, door and window hinges, cares and protects plastic and rubber, eliminates plastic panels squeaking, penetrating surface deeply. It has a pleasant smell.

DIRECTIONS FOR USE: Shake well before use. Apply a thin layer on treated surfaces. Repeat if necessary. Avoid contact with lacquered surfaces and food.

Available in 110ml and 220ml packing.

ZOLLEX wiper blades are extremely high quality and durable. Makeing driving safer and more confurtable. Wipers are made from 100% rubber coated graphite layer. Wipers provide contact with the glass in all weather conditions. Thanks to high-quality rubber, they operate almost silently. Suitable for all types of vehicles, as offered in multiple dimensions.

ZOLLEX wiper blades are extremely high quality and durable. Makeing driving safer and more confurtable. Wipers are made from100% rubber coated graphite layer. Wipers provide contact with the glass in all weather conditions. Thanks to high-quality rubber, they operate almost silently. Suitable for all types of vehicles, as offered in multiple dimensions. 

Provides cleaning and degreasing of brake pads, discs, drums and cylinders, as well as other metal surfaces and parts. Significantly reduces heating of various parts of the brake mechanism and increases braking performance. It has powerful jet stream and works perfectly from every angle.   

DIRECTIONS FOR USE: Once you've removed the tire, hold the can about 0,5 meters away from the brakes. Then start spraying at the top of the brake parts moving downward. This will wash the dust, dirt and other contaminates down and away from the brake part. Best to use at temperature from 5°C to 35°C.

Available in 500ml in 18L packing.

Spray cleans the ventilation and air conditioning system and neutralizes unpleasant odor.  It has a pleasant smell with a deodorizing effect. For single use only.

DIRECTIONS FOR USE: Put the air conditioner switch to air recirculation mode. Place the bottle into car cabin and push the nozzle to start spraying. Close all the doors and wait for 15-20 minutes. Ventilate the passenger compartment.

Available in 200ml and 150ml packing.

Spray for cleaning ventilation and air conditioning system and neutralizing odors. It has a pleasant smell with deodorizing effect. For many time usage.

Directions to use: Turn on internal circulation of AC. Insert the tube into the air intake and press trigger. Repeat if necessary. After use, ventilate the cabin. 

Available in 200ml packing.

ZOLLEX wiper blades are extremely high quality and durable. Makeing driving safer and more confurtable. Wipers are made from100% rubber coated graphite layer. Wipers provide contact with the glass in all weather conditions. Thanks to high-quality rubber, they operate almost silently. Suitable for all types of vehicles, as offered in multiple dimensions. 

ZOLLEX offers also wipers blades for busses and trucks. Metal outer frame is even more rigid, because of the larger wiping area. This high quality and very durable wipers are available with up to 3 adapters.

In CATALOGUE of wiper blades pick Your vehicle model and select the proper wiper blade ZOLLEX.

The attractive design and pleasant fragrance of air fresheners ZOLLEX will definitely enliven the interior of your home and vehicle. They are available in nice colorful printing or without it.

They are available in many odors like:
Lemon, New car, Vanilla, Cool breeze, Sweet cherry, Green tea

Hand cleansing gel. Specially formulated to remove heavy-duty dirt from the hands. Thanks to its compound, rich in surfactants and degreasing substances, it can be used in every situation involving greasy dirt. It contains collagen which protects the hands and keeps them soft.

Available in 1L and 3L packing.

ZOLLEX Car washing glove with net is rerfect for car washing, because it removes the insect stains and leaves no scratches. It may also be used for dust wiping from various surfaces. It has high strength and durability.

ZOLLEX Sponge with net is perfect for car washing and leaves no scratches. It may also be used for dust wiping from various surfaces. It has high strength and durability.

ZOLLEX sponge is suitable for car and household cleaning of every surface. Cleans large surfaces faster. Bone shape offers better grip. Highly durable.

Removes resin, tar, traces of insects, bird droppings and road dirt. Can be used to remove protective wax, polish and silicone before repainting the vehicle. Does not damage the vehicle paint coating.

Directions for use:  Spray onto the dirty surface, wait for 3-5 minutes and wipe with a soft dry cloth. For maximum effect, it is desirable to remove fresh dirt. Do not use on hot surfaces, in direct sunlight or inside the vehicle.  Work in a well ventilated area.

Available in 450ml packing.

It is 100% applicable to breach holes within 6 mm diameter on tubeless rubber tires of cars, motorcycles and electrical bicycles. No jack or tyre-undo is needed. It forms a solid plug to stop the leak. Does not influence the wheel balancing, the wheel remains in active position, prevents the formation of air leaks in the future. It can be used in temperatures up to -18°C. In lower temperatures, warm up the bottle (recommended in warm water below 40°C). Does not cause rust formation on the inner surface of the wheel.

Directions for use: remove the item that punctured the tire. Shake the bottle. The tire valve must be in upright position. Fix the hose on the valve and inflate the tire. Single use only. Drive for about 1-2 km and then pump the tire as car manufacturer recommends. 

Available in 450ml packing.

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

Bulb Pure vision creates a white light, which further increases visibility.

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

Bulb Pure vision creates a white light, which further increases visibility.

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

Bulb Pure vision creates a white light, which further increases visibility.

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

Bulb Pure vision creates a white light, which further increases visibility.

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

.

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

ZOLLEX bulbs are high quality, have an extremely luminous intensity and lifetime and meet all European standards (ECE St.37).

Removes snow and ice from glass, lights, mirrors and windshield of your car quickly, easily and safely. Prevents the formation of ice and stops snow from sticking. Defrosts door locks and seals. Will not damage paintwork and is also safe for chrome, plastic and rubber surfaces. Effective up to -30°C. It is recommended for all types of vehicles (cars, buses, trucks).

Usage: spray the product on the surface and wait for 2-4 minutes. Remove the remaining ice from the glass with the help of a scraper or brush, if necessary - wipe the glass with a dry cloth. To prevent ice from forming - spray the product on the glass in advance and leave. To defrost locks - spray the product into the lock and wait for 2-4 minutes. 

Available in 450ml packing.

ZOLLEX glass sealant is an adhesive-sealant for glass pasting. Suitable for cars with or without airbags. Application: clean the windshield and painted glued surfaces with a cleaner. New technology sealant is used without PRIMER.  The windshield should be installed within 15 minutes. The car can be used after 4 hours. We recommend the use of the car after 24 hours. The product is for professional use.

Available in 310ml packing.

DECO BLIK High temperature paint is used for metal, plastic and wooden surface painting. Suitable for interior and exterior work. The paint can withstand temperatures up to 600°C after drying. It is suitable for radiators, boilers, gas stoves, exhaust pipes and barbecues painting. Oil, rust, salt, water resistant.  

Available in 450ml packing and in black and gray colour.

DECO BLIK Protective rubber paint is excellent for changing the surface appearance. You can use it for wheels, emblems, thresholds, grills, plastic interior parts. Does not damage the treated surface. When properly applied the coating can be washed both by hand, using high pressure water, or automatic car wash with mechanical brushes. Rubber paint is resistant to fading, frost, salt. Can be applied on the wheels, bumpers and other parts of your car specifically to protect the original surface in the winter season.

Available in 400ml packing and colors:
-black
-chameleon (gold/red/purple)
-chameleon (purple/green/blue)
-lotos white
-fluorescent red
-lacquer
-green
-bright yellow
-silver
-summer night blue transparent
-gold
-fluorescent green
-fluorescent yellow

High-quality white grease based on lithium with package of additives. Provides long-lasting lubrication and has a water-repellent and heat-resistant properties, contains corrosion inhibitors. Used for lubrication of joints and hinges, hinges and latches, cam pins, cables, track mechanisms, gears and chains, water pumps, guides, speedometer hawsers, mobile belt conveyors, jaws of breaker-spreader, seats’ guiding frameworks, brakes and gearshifts, troughs of garage doors and also in other places.

Directions for use: Shake well before use. Apply to the place of lubrication, using, if necessary, additional handset. Do not mix with other lubricants. Do not use on energized equipment.

Available in 110ml packing and 400ml packing.

DECO BLIK Universal quickly drying acrylic primer paint has long-lasting anticorrosion effect. It can be used for all kinds of different surfaces like metal, glass, wood, ceramics and most of plastic.  

Directions for use: The surface must be cleaned from rust, grease and old paint. Shake a bottle before use, so that you hear ball knock . Spray from a distance 25-30 cm.  Apply evenly with overlapping strips. After use, clean the sprayer by turning the can and blowing the head to stop paint coming out. 

Available in 400ml packing and in gray color.

ZOLLEX Nylon cable ties are very strong and flexible. They come in black or white and in different dimensions.

Packing: 100 ties

ZOLLEX Microfiber polishing glove is soft and leaves no trace. Suitable for polishing of vehicles as well as for cleaning in household.

ZOLLEX Glass cleaner is used for cleaning the interior and exterior glass surfaces of the vehicle. It has a high cleaning power. It does not leave streaks. It is water-repellent and has anti-misting effect.

Application: Spray directly on glass that should be cleaned. Wipe the surface with clean and dry cloth, paper towel or microfiber. 

Available in 750ml and 5L packing.

ZOLLEX plastic cleaner efficiently cleans, renews and protects all plastic parts.

Application: Wipe the dust from plastic surface. Spray the product from a distance of 15-20 cm. After 30-40 sec., wipe with a clean, dry cloth.

Available in 750ml packing.

ZOLLEX plastic polish for cleansing and protection of plastic, wood and rubber surfaces. It prevents aging and cracking, restores the structure of the material. It has an antistatic effect. It protects against dust, dirt and grease. Leaves a glossy effect and a pleasant smell.

Usage: Shake before use. Spray from a distance of 15-20 cm. After 1 to 2 minutes, wipe with a dry clean cloth. Do not use on steering wheel. 

Available in 750ml packing and two different odors: lemon and vanilla.

ZOLLEX Textile cleaner is used for deep cleaning of all kinds of fabric. It penetrates deep into the structure of fabric and actively cleans it. Easily removes spilled drinks and food stains. It helps to restore the original appearance and color of the product. It has a pleasant smell. Does not leave streaks.

Application: Spray the cleaner from a distance of 15-20 cm on to the surface. Rub with a damp sponge leave for a few minutes, but without letting it dry. Wipe with a clean, damp cloth or sponge. If necessary, clean the dirt with a brush.

Available in 750ml packing.

ZOLLEX Universal 3 in 1 cleaning spray for the whole car quickly and effectively cleans textiles, vinyl, plastic and glass. It doesn’t contain alcohol, and doesn’t leave stains. It removes most stains. Recovers original form and color. It has a pleasant smell.

Application: First vacuum the car interior. Spray the product on the contaminated sites at a distance of 15-20 cm from the surface. Rub in the product with a damp sponge. Wait for a few minutes, but don’t let it dry of. Wipe with a clean, dry cloth or sponge. If necessary, clean the dirt with a brush.

Available in 750ml packing.

ZOLLEX diamond polish is an innovative product 3 in 1 - wax, polish, protection. It provides a stable protective film against UV, water, dust and dirt. It gives the treated surface more color depth. Suitable for all paint coatings. The protective layer is not washed off within a month.

Application: Before application the car must be washed and dried. Spray the product in stages for example: first hood, then roof etc. Rub the diamond polish with clean, dry and soft cloth. 

Available in 750ml packing.

ZOLLEX Quick wax is designed for quick drying after washing the car. It promotes rapid runoff of water and gives additional protection from environmental factors such as UV radiation. Does not leave traces and streaks. It provides a high level of gloss. Restores natural color. Suitable for all types of paint.

Application: Wash the car with car shampoo. Shake well before you use. Apply the wax on the wet surface using a quick trigger and polish it dry with a soft cloth. Follow the rule that every detail is polished separately.

Available in 750ml packing.

ZOLLEX tire shine polish cleans and protects your tires making them black like new, with increased shine. Quickly restores the original appearance of tires, making them clean and bright. It softens all types of rubber and protects against cracking.

Application: Spray evenly on the lateral surface of the dry tire. Rub over the entire surface of the tire with a sponge.

Available in 750ml and 5L packing.

ZOLLEX Whell cleaner for external cleaning of wheels from dirt of any type. Active components easily and effectively remove spots of oil, grease and brake dust mixed with mud. The product prevents the accumulation of dirt. Cleaner is safe for tires. It is convenient to use and it doesn't require dilution.

Usage: Do not use on hot wheels. Apply the product with the spray on wheels, wait 1-2minutes, then rinse with high pressurized water and wipe with a dry cloth.

Available in 750ml and 5L packing.

ZOLLEX Wheel cleaner PROFESSIONAL for external cleaning of wheels from dirt of any type. Active components easily and effectively remove spots of oil, grease and brake dust mixed with mud. The product prevents the accumulation of dirt. Cleaner is safe for tires. It is convenient to use and it doesn't require dilution.

Usage: Do not use on hot wheels and chrome coating. Apply the product on the wheels and wait 1 minute, then rinse with high pressurized water and wipe with a dry cloth. 

Available in 750ml packing.