ZOLLEX Red gasket maker is suitable for gaskets used in high temperature applications up to 350°C. Excellent heat control and torque retention for overhead cam and timing chain covers. Dries hard and flexible, and improves high temperature performance. Resists most engine fluids.

DIRECTIONS FOR USE: Remove old gaskets and clean all surfaces. Remove cap, puncture inner seal, screw on nozzle and cut to required size. Apply a continuous, uniform, 1.5 -3mm bead around the perimeter of one surface. 4. Wait 10 minutes for silicone to skin cover. Reassemble parts. The gasket is fully prepared in 24 hours.  NOTE: Leave space for the gasket when reassembling. Do not over-tighten bolts. Remove excess silicone with a dry cloth or alcohol wipe. Silicone dries to touch in 1 hour. Allow 24 hours to fully cure and bond. 

Available in 85g and 310g packing.

ID	Product code	Nr/CTN
2711	8-RD	12
3730	8C-RD	12