List of all groups:
ZOLLEX Rear view mirror adhesive is excellent for bonding glass and metal.
Easy to use: Mark the original location of mirror mounting on the windshield. Clean any dirt from the bonding surface, degrease it and dry. In case of product RM-281 (1,2g) remove the cardboard seal from the PRIMER tube and put it on the opposite end. Squeeze the cardboard seal to burst the glass bulb inside the plastic tube. Allow the liquid to run to the tip. In case of product RM-283 (0,9g) wipe the area with AKTIVATOR napkin. Apply PRIMER to the inside of the windshield in the marked area . Allow to dry for 1-2 minutes. Apply one drop of glue to the mirror mount. DO NOT SMEAR . Push the mirror mounting onto the glass on the marked place and hold without moving for 1-2 minutes to allow the adhesive to cure. Wait for 10 minutes and mount the mirror.
Na voljo v 1,2g in 0,9g pakiranju.
ID | Product code | Nr/CTN |
2741 |
RM-281 | 12 |
3136 | RM-283 | 12 |
ZOLLEKS AVTO d.o.o., Copyrights reserved
Izdelava spletnih strani - Spletna postajaWebsite developed by: